P 2.5 LED Video Wall Specifications

P2.5 LED Video Wall
P3.9 LED Video Wall


Vanguard’s Tungsten cabinet is available in P1.9 indoor, P2.5 indoor  The Tungsten series features edge corner protectors and slightly raised modules to provide protection for the edges. A protective resin coveringresults in a highly impact resistant LED Display. Tungsten is the durable cabinet that the display industry has been waiting for as it can withstand the rigors of any environment. The cabinet is front or rear serviceable and has a die-cast aluminum frame. The power supply module can easily be swapped as a single unit by detaching 4 clips, pulling the PSU and replacing it with a new one. LED modules can be quickly removed using a glass suction cup tool and replaced with a new module. The 8 point integral locking system enables quick assembly as well as precise alignment. The user friendly internal side locks allow for curvature up to 5 degrees concave or convex. Aluminum modules improve flatness uniformity which allows for the protective resin encasement to be as flat and uniform as possible. Aluminum modules also improve heat dissipation over traditional modules.

Additional Features

  • Fold-over edge protectors for keeping cabinet corners protected during set-up and tear down.
  • Curvable 5 degrees concave or convex.
  • Low Power Consumption.
  • 14+-bit gray scale.
  • Removable PSU and data housing.
  • No internal ribbon cables.
  • Superb color & brightness uniformity.
  • Refresh rate minimum of 2880Hz
  • Contrast Ratio: 3000:1

Component Overview

Standard Components

  • Nationstar Gold wire LED’s
  • Meanwell auto switching Power Supplies
  • ChipOne IC Drivers
  • Glue on Board Lamp Protection (indoor only)

Technical Specifications

Pixel Pitch




LED Type


LED Configuration

3 in 1

Pixel Density




Module Size

9.84″ x 9.84″

Module Resolution

128 x 128

100 x 100

64 x 64

Lifetime to half Brightness

100,000 hrs

Contrast Ratio



800 Nits

4500-5000 Nits

Viewing Angle





Cabinet Material

Die Cast Aluminum

Cabinet Size

19.8″ x 19.8″

Cabinet Resolution

256 x 256

200 x 200

128 x 128

Min. Viewing Distance

6.3 ft.

8.25 ft.

13 ft.

Modules Per Cabinet


Cabinet Weight

19.1 lbs

Service Access

Front or Rear

IP Rating


IP65 Front/IP54 Rear

Internal Operation

Driving Method

1/15th Scanning

Grey Scale

14 bit

IC Driver

Chipone 2053

Refresh Rate


Frame Frequency


AC Power

Source Voltage

100-240V, 50-60Hz

Max Power Consumption


Avg. Power Consumption



Operating Temperature

-10° to +50°C

Storage Temperature

-20°C to +60°C

Operating Humidity

20% to 90% RH

Close Menu